Projector Panasonic PT-DZ21K

Detail Produk Projector Panasonic PT-DZ21K

Model			Projector Panasonic PT-DZ21K
Power supply			200–240 V AC, 50/60 Hz (Max current requirements: 12 A @200 V)
Power consumption			2,300 W (0.3 W with STANDBY MODE set to ECO,*1 9 Wwith STANDBY MODE set to NORMAL.)
Dissipation BTU			Max. 7,848 BTU/hour (without light output: 7,585 BTU/hour)
DLP™ chip	Panel size		24.4 mm(0.96 inches) diagonal(16:10 aspect ratio)	24.1 mm(0.95 inches) diagonal(4:3 aspect ratio)	21.6 mm(0.85 inches) diagonal(16:9 aspect ratio)
	Display method		DLP™ chip x 3, DLP™ projection system
	Pixels		2,304,000(1,920 x 1,200) x 3,total of 6,912,000 pixels	1,470,000(1,400 x 1,050) x 3,total of 4,410,000 pixels	1,049,088(1,366 x 768) x 3,total of 3,147,264 pixels
Lens			Optional powered zoom and fixed-focus lenses
Lamp			465 W UHM lamp x 4, replacement cycle of up to 2,000 hours*2
Screen size (diagonal)			1.78-25.4 m(70-1,000 inches),1.78–15.24 m(70–600 inches)with the ET-D75LE8,16:10 aspect ratio	1.78-25.4 m(70-1,000 inches),1.78–15.24 m(70–600 inches)with the ET-D75LE8,4:3 aspect ratio	1.78-25.4 m(70-1,000 inches),1.78–15.24 m(70–600 inches)with the ET-D75LE8,16:9 aspect ratio
Brightness*3			20,000 lm(four-lamp)		17,000 lm(four-lamp)
Center-to-corner uniformity*3			90%
Contrast*3			10,000:1 (full on/off, with dynamic iris set to “3” )
Resolution			1,920 x 1,200 pixels	1,400 x 1,050 pixels(Input signals thatexceed this resolution willbe converted to1,400 x 1,050 pixels.)	1,366 x 768 pixels(Input signals thatexceed this resolution willbe converted to1,366 x 768 pixels.)
Scanning frequency	SDI	SD-SDI	SMPTE ST 259 compliant, [YCBCR 4:2:2 10-bit] 480i, 576i		–
		HD-SDI	SMPTE ST 292 compliant,[YCBCR 4:2:2 10-bit] 720/50p, 720/60p, 1035/60i, 1080/50i,1080/60i, 1080/25p, 1080/24p, 1080/24sF, 1080/30p		–
		Dual-link HD-SDI	SMPTE ST 372 compliant,[RGB 4:4:4 12-bit /10-bit] 1080/50i, 1080/60i, 1080/25p,1080/24p, 1080/24sF, 1080/30p,[X´Y´Z´ 4:4:4 12-bit] 2,048 x 1,080/24p, 2,048 x 1,080/24sF		–
		3G-SDI	SMPTE ST 424 compliant,[YPBPR 4:2:2 10-bit] 1080/50p, 1080/60p,[RGB 4:4:4 12-bit /10-bit]1080/50i, 1080/60i, 1080/25p,1080/24p, 1080/24sF, 1080/30p		–
	HDMI/DVI-D		480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/24p,1080/24sF, 1080/25p, 1080/30p, 1080/60p, 1080/50p,VGA (640 x 480)–WUXGA*4 (1,920 x 1,200),compatible with non-interlaced signals only, dot clock: 25–162 MHz
	RGB		fH: 15–100 kHz, fV: 24–120 Hz, dot clock: 20–162 MHz
	Video/Y/C		fH: 15.75 kHz, fV: 60 Hz [NTSC/NTSC4.43/PAL-M/PAL60],fH: 15.63 kHz, fV: 50 Hz [PAL/PAL-N/SECAM]
Optical axis shift*5	Vertical		±55 % (±44 % withthe ET-D75LE6)from center of screen(powered)	±50 % (±40 % withthe ET-D75LE6)from center of screen(powered)	±70 % (±60 % withthe ET-D75LE6)from center of screen(powered)
	Horizontal		±20 % (±15 % withthe ET-D75LE6)from center of screen(powered)	±30 % (±20 % with the ET-D75LE6)from center of screen (powered)
Keystone correction range			Vertical: ±40°*6, horizontal: ±15°		Vertical: ±40°*6
Keystone correction rangewith optional Upgrade Kit			Vertical: ±45°*6*8, horizontal: ±40°*7*8		–
Installation			Ceiling/floor, front /rear
Terminals	SDI 1 IN		BNC x 1 (3G/HD/SD-SDI)		–
	SDI 2 IN		BNC x 1 (HD/SD-SDI)		–
	3D SYNC IN/OUT		BNC x 1 (3D timing signal)		–
	3D SYNC OUT		BNC x 1 (3D timing signal)		–
	DVI-D IN		DVI-D 24-pin x 1 (DVI 1.0 compliant, compatible with HDCP,compatible with single link only)
	HDMI IN		HDMI 19-pin x 1 (Deep Color, compatible with HDCP)
	RGB 1 IN		BNC x 5 (RGB/YPBPR/YCBCR/YC x 1)
	RGB 2 IN		D-Sub HD 15-pin (female) x 1 (RGB/YPBPR/YCBCR x 1)
	VIDEO IN		BNC x 1 (composite video)
	SERIAL IN		D-sub 9-pin (female) x 1 for external control (RS-232C compliant)
	SERIAL OUT		D-sub 9-pin (male) x 1 for link control (RS-232C compliant)
	REMOTE 1 IN		M3 x 1 for wired remote control
	REMOTE 1 OUT		M3 x 1 for link control (for wired remote control)
	REMOTE 2 IN		D-sub 9-pin (female) x 1 for external control (parallel)
	LAN		RJ-45 x 1 (for network connection, 10Base-T/100Base-TX, compliant with PJLink™)
Cabinet materials			Molded plastic
Dimensions (W x H x D)			620 x 291*9 x 800 mm (24-7/16″ x 11-15/32″*9 x 31-1/2″) (optional lens not included)
Weight*10			Approximately 43 kg (94.8 lbs) (optional lens not included)
Shipping dimensions(W x H x D)	PT-DZ21KU / DS20KU / DW17KUPT-DZ21KEJ / DS20KEJ / DW17KEJ		965 x 418 x 865 mm (38″ x 16-15/32″ x 34-1/16″)
	PT-DZ21KE / DS20KE / DW17KE		946 x 402 x 846 mm (38″ x 15-13/16″ x 33-5/16″)
Shipping weight	PT-DZ21KU / DS20KU / DW17KU		53 kg (116.8 lbs)
	PT-DZ21KEJ / DS20KEJ / DW17KEJ		54 kg (119.0 lbs)
	PT-DZ21KE / DS20KE / DW17KE		51 kg (112.4 lbs)
Operation noise*3			49 dB (quad lamp operation)
Operating environment			Operating temperature: 0–45°C (32–113°F)*11,operating humidity: 10– 80 % (no condensation)
Applicable software			Logo Transfer Software,Multi Projector Monitoring & Control Software,Geometry Manager Pro (included in the ET-UK20)		Logo Transfer Software,Multi ProjectorMonitoring & Control Software
Supplied accessories			Power cord with secure lock, wireless/wired remote control unit, batteries (R6/AA type x 2)